RT-OBD001
Features
| Sensors | Accelerometer |
| Scenarios | Green Driving, Over Speeding detection, GNSS Fuel Counter, Excessive Idling detection,Unplug detection, Towing detection, Crash detection, Auto Geofence, Manual Geofence, Trip |
| Sleep modes | GPS Sleep, Online Deep Sleep, Deep Sleep, Ultra Deep Sleep |
| Configuration and firmware update | FOTA Web, FOTA, Teltonika Configurator (USB, Bluetooth), FMBT mobile application (Configuration) |
| SMS | Configuration, Events, Debug |
| GPRS commands | Configuration, Debug |
| Time Synchronization | GNSS, NITZ, NTP |
| Fuel monitoring | OBD2 |
| Ignition detection | Accelerometer, External Power Voltage, Engine RPM |
Installation
| Pin | Name | Description |
|---|---|---|
| 2 | PWM_BUS+/VPW | |
| 4 | GND(-) | Ground |
| 5 | GND(-) | Ground |
| 6 | CAN_H | CAN high |
| 7 | K-Line | |
| 10 | PWM_BUS- | |
| 14 | CAN_L | CAN low |
| 15 | L-Line | |
| 16 | VCC (10-30)VDC(+) | Power supply (+10-30VDC) |
Module
| Name | Quectel BG96, Teltonika TM2500 |
| Technology | LTE CAT M1/CAT NB1/EGPRS/GNSS/BLUETOOTH |
GNSS
| GNSS | GPS, GLONASS, GALILEO, BEIDOU, QZSS, AGPS |
| Receiver | 33 channel |
| Tracking sensitivity | -165 dBM |
| Accuracy | < 2.5m CEP |
| Hot start | < 1s |
| Warm start | < 25s |
| Cold start | < 35s |
Cellular
| Technology | LTE CAT M1/CAT NB1/EGPRS |
| 2G bands | Quad-band 800/850/900/1900MHz |
| 4G bands |
LTE FDD: B1/B2/B3/B4/B5/B8/B12/B13/B18/B19/B20/B28 LTE TDD: B39 (For CAT M1 Only) |
| Data transfer |
CAT M1: Max. 375Kbps (DL), Max. 375Kbps (UL) CAT NB1: Max. 32Kbps (DL), Max. 70Kbps (UL) GPRS: Max. 107Kbps (DL), Max. 85.6Kbps (UL) |
| Data support | SMS (text/data) |
Power
| Input voltage range | 10-30VDC with overvoltage protection |
| Internal Back-up battery | 170mAh Li-Ion battery 3.7V (0.63Wh) |
Bluetooth
| Specification | 4.0 + LE |
| Supported peripherals | Temperature and Humidity sensor, Inateck Barcode Scanner, Universal BLE sensors support |
Physical
| Dimensions | 67.2 x 49.6 x 25mm (L x W x H) |
| Weight | 63g |
OBD2 Interface
| Data | K-Line, CAN bus data |
| Data reading |
Up to 32 vehicle onboard parameters, supported OBD protocols: SAE J1850 PWM (41.6 kbaud) SAE J1850 VPW (10.4 kbaud) ISO 9141-2 (5 baud init, 10.4 kbaud) ISO 14230-4 KWP (5 baud init, 10.4 kbaud) ISO 14230-4 KWP (fast init, 10.4 kbaud) ISO 15765-4 CAN (11 bit ID, 250 kbaud) ISO 15765-4 CAN (11 bit ID, 500 kbaud) ISO 15765-4 CAN (29 bit ID, 250 kbaud) ISO 15765-4 CAN (29 bit ID, 500 kbaud) |
Interface
| Connection | OBD2 Socket |
| GNSS antenna | Internal High Gain |
| Cellular antenna | Internal High Gain |
| USB | 2.0 Micro-USB |
| LED indication | 2 status LED lights |
| SIM | Micro-SIM |
| Memory | 128MB internal flash memory |
Operating Environment
| Current consumption at 12V |
GPRS: max 50mA Nominal: average 35mA GPS sleep: average 12mA Deep Sleep: average 4.5mA |
| Battery charge current |
Average: 140mA Rated: 250mA |
|
Operating temperature (without battery) |
-40°C to +85°C |
|
Storage temperature (without battery) |
-40°C to +85°C |
| Operating humidity | 5% to 95% non-condensing |
| Ingress Protection Rating | IP41 |
| Battery charge temperature | 0°C to +45°C |
| Battery discharge temperature | -20°C to +60°C |
| Battery storage temperature |
-20°C to +45°C for 1 month -20°C to +35°C for 6 months |
